Scrap Sunday: The doll carrier

I am currently writing this post whilst waiting for a couple of babies joining the family. I am scheduling it (the post, not one of the babies) for Sunday, so when you are reading it, we might not be waiting anymore 🙂

Anyway, I made a doll carrier for the soon-to-be big sister of my future nephew and I am quite pleased with it. And I am not the only one, in fact I have already gotten complaints why ours is not so pretty. For the record, 4 years ago, I was running through all the fabric shops in Shepherds Bush to find the requested “airplane” fabric for the doll carrier of a certain young lady. Which then really wasn’t cheap. But I guess, taste can change, particularly if you are not 2 anymore but 6. And I have to agree, we chose really nice fabrics (you might recognise them from other projects) for this one.

I think this carrier is suitable for slightly younger children, so the straps look a bit out of proportion on the following picture because of the model being a bit taller. Or should the strap be fixed slightly deeper? Maybe.

IMG_3873

The carrier can be worn in front or at the back.IMG_3874

I made the straps a bit longer, same for the waist strap as it was already a bit tight on my children, depending on what they are wearing and they actually tend to be on the slimmer side.

I found the ebook initially on Etsy (at the time not even knowing what Etsy was) and whilst I am happy that I found it there, I would do a few things differently next time. Which I would like to point out (to myself) as I am sure that 4 years ago I had already thought the same but didn’t remember it this time round.

When you print out the pattern, the line is actually a couple of mm thick so it is hard to know where to cut to make sure that the straps will match their positions on the main body. Also, I couldn’t read what seam allowance is included, I do think it is meant to be 1/4 in.

IMG_3871

The pocket fabric is folded, which is a bit too stiff if you are using a thicker cotton as I did in this case but perfectly fine when using a thinner material.

I struggled quite a bit with the waist. First of all the little curve between waistband and main body but also where the waist thingy joins the strap. In the pattern the waist thingy doesn’t end in a straight line but in a slightly sloped line so I have now an edge in between the main waist thingy and the strap which doesn’t make much sense. So next time, I will have to make sure that I even this out when placing the strap:

IMG_3872The waist strap is closed with a proper side release buckle, but the shoulder ones only by sliding the strap through a bar slide buckle which I find a bit too loose. In the case of the pictured carrier it is actually ok as the material is a bit thicker and I made the straps on purpose a tiny bit wider but the first one was made of a rather thin cotton and the straps just didn’t stay in place. So maybe a proper buckle like for the waist might be better. But then it means that the carrying child needs a lot more help to get it on an off. So the loose version might be the better option anyway.

The e-book itself is done very thoroughly, lots of pictures and explanations, I was actually a bit overwhelmed and maybe for me personally, a little less would have been better. I guess this is due to me struggling a bit with many unfamiliar terms on one hand but maybe spreading the whole thing out on more pages would have been good… Which makes me realise that I tend to squeeze things when writing patterns to save paper. So this is another lesson learnt, I hope.

I didn’t mean to criticize the e-book as it helped me make already three wonderful doll carriers but for me personally there are a few things that I would do differently and hopefully these comments will help me or anybody else when using the pattern next time.

 

 

 

 

 

 

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s